Labeling The Module - Aventics DDL Instrucciones De Servicio

76 AVENTICS | DDL | R499050020–BDL–001–AD
Assembly
Bus coupler
Input/output modules
Fig. 6: Labels on the bus coupler, input module (8x M8 inputs) and output module (8x M8 outputs),
examples
Each input/output module extends the valve system by 60 mm
(60 x m). The E end plate has an installation depth of 18 mm.
6.2

Labeling the module

O
Inscribe the address provided/used for the bus coupler on
the bus coupler in the BTN field.
O
Label the connections directly on the labels of the input/
output modules.
The markings on the connections indicate which labels are
assigned to the connections.
SENSOR SENSOR
UV 1-4 UV 1-4
UV 5-8 UV 5-8
UV 9-12 UV 9-12
DDL DDL
RMV04-DDL RMV04-DDL BTN BTN