Adjusting E-Xbass; Display; Adjusting The Display Brightness - Blaupunkt Melbourne SD27 Instrucciones De Manejo

When you have fi nished making your chang-
es,
u press the AUDIO button <.

Adjusting E-XBASS

In the "E-XBASS" submenu, you can also ad-
just the cut-off frequency in addition to the
X-BASS boost. You can select from 50 Hz,
100 Hz and 200 Hz.
Press the AUDIO button <.
u
"BASS" appears on the display.
u
Press the or
until "ENHANCED" appears on the dis-
play.
u Press the M/OK button > to display the
submenu.
"E-BASS" appears on the display.
u
Press the or
until "E-XBASS" appears on the display.
u button 5 to call up the
Press the
submenu.
"GAIN" and the currently set value are dis-
played.
u
Press the or
between "GAIN" (X-BASS boost) and
"FREQ" (frequency).
u
Press the or
the selected setting.
When you have fi nished making your chang-
es,
press the AUDIO button <.
u
button 5 repeatedly
button 5 repeatedly
button 5 to select
button 5 to change

Display

If you switch on the vehicle illumination,
the display brightness switches day mode
to night mode. This requires that your car
sound system is connected as described in
the installation instructions. Your vehicle
must feature the corresponding connection
option.

Adjusting the display brightness

You can adjust the display brightness sepa-
rately for night (DIM NIGHT) and day (DIM
DAY) in steps ranging from 1 to 16.
u Press the M/OK button >.
The display shows "MENU".
u
Press the or
until "DIM DAY" or "DIM NIGHT" appears
on the display.
u Press the M/OK button > to display
the submenu.
"DIM DAY" or "DIM NIGHT" and the currently
set value are displayed.
u
Press the or
brightness.
When you have fi nished making your chang-
es,
u press the M/OK button >.
To exit the menu,
u press the ESC button 6 or wait approx.
8 seconds.
X-BASS | Display
button 5 repeatedly
button 5 to adjust the
25