External Audio Sources; Factory Settings (Normset) - Blaupunkt Melbourne SD27 Instrucciones De Manejo

External audio sources | Factory settings (Normset)

External audio sources

External audio sources, such as portable CD
players, MiniDisc players or MP3 players, can
be connected to the device in two ways.
1. To the rear AUX-IN input (if no CD
changer is connected to the device).
The SRC button ? allows for select-
ing the rear AUX-IN input. The display
then shows "CD / AUX-IN".
Note:
An adapter cable is needed to connect
an external audio source to the rear
AUX-IN input. You can obtain this cable
(Blaupunkt no.: 7 607 897 093) from
your Blaupunkt dealer.
2. To the front AUX-IN socket.
As soon as an audio source is connect-
ed to the front AUX-IN socket, it can be
selected with the SRC button ?.The
display then shows "FRONT AUX-IN".
26

Factory settings (Normset)

You can reset the device to the factory set-
tings.
Note:
Your personal settings are deleted dur-
ing reset (Normset).
u Press the M/OK button >.
The display shows "MENU".
u
Press the or
until "NORMSET" appears on the dis-
play.
u Press the M/OK button > to display the
submenu.
"NORM OFF" appears on the display.
To reset the device to the factory settings,
u press the M/OK button > for longer
than 4 seconds.
"NORM ON" appears on the display and the
device is reset.
Factory settings:
Volume of traffi c an-
nouncements (TA VOL)
Power-on volume
(ON VOL)
Volume of muting
(MUTE LEVEL)
Volume of telephone/nav-
igation announcement
(TEL VOL)
Seek tuning sensitivity
(SENS)
Scan time (SCAN TIME)
button 5 repeatedly
30
Last
Volume
0
25 (RDS) or
10 (NRDS)
H16
10
seconds