Memory Function; Storing Data; Recalling Data; Erasing Data - Gima 32924 Manual Del Usuario

Ocultar thumbs Ver también para 32924:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

*N.B.!
D. LCD screen displays your systolic rate, diastolic rate,
pulse, Risk Category Indicator Bar, and Irregular Heartbeat
Detector symbol with date and time for 1 minute.
E. Without any operation for 1 minute, device automatically
shuts off.

MEMORY FUNCTION

Storing data

After each measurement, the systolic and diastolic pressure, heart rate with date
and time will be automatically stored.
The monitor can store 120 memories total for 3 users, and automatically replace
the oldest data with new one.

Recalling data

+
A. Press
button to select User 1, 2, or 3.
B. Press M button to enter Memory Mode. LCD displays
average of last 3 measuring results first.
C. Press M button again, LCD displays the latest measuring
following measurements in sequence.
D. To stop reading memories, press
and switch to Standby Mode.

Erasing data

+
A. Press
button to select User 1, 2, or 3.
B. Press M button to enter Memory Mode.
C. Press and hold
the data will be erased automatically.
D. To confirm the data in the selected user has been erased,
press M button and no data should appear.
Note: Once deleted, your data can NOT be restored.
ENGLISH
button.
+
and
buttons at the same time,
button,
34

Publicidad

Tabla de contenido
loading

Tabla de contenido