Memory Function; Storing Data; Recalling Data - Gima 32926 Manual Del Usuario

35
B. With the cuff wrapped around your wrist, press
measurement. All display units appear on the screen.
*Note!
Do not inflate the cuff until it is wrapped around your wrist.
After all symbols disappear, the display will show "00".
The monitor is "Ready to Measure" and will automatically
inflate to the level that is right for you.
C. After inflation of the cuff, the pressure will slowly decrease.
When pulse is detected, PULSE SYMBOL
*Note!
• If the cuff does not stop inflating, remove the cuff at once.
• To stop measurement, press
D. LCD screen displays your systolic rate, diastolic rate, pulse,
Risk Category Indicator Bar, and Irregular Heartbeat Detector
symbol with date and time for 1 minute.
E. Without any operation for 1 minute, device automatically shuts off.

mEmorY FUnctIon

storing data

After each measurement, the systolic and diastolic pressure, heart rate with date and time will be
automatically stored. The monitor can store 120 memories total
for 3 users, and automatically replace the oldest data with new one.

recalling data

+
A. Press button to select User 1, 2, or 3.
B. Press M button to enter Memory Mode. LCD displays average
of last 3 measuring results first.
C. Press M button again, LCD displays the latest measuring result.
Keep pressing M button, user can scroll through following
measurements in sequence.
flashes.
button.
ENGLISH
button to start