Deleting Measurements From The Memory - Gima KD-735 Guía De Uso

29
Confirm your selection by pressing "MEM"
button. The current bank can also be confirmed
automatically after 5 seconds with no operation.
If no result stored, LCD will show dashes
as picture 7-3.
c. After selecting the memory bank, the LCD
will display the average value of the last three
results in this bank, See picture 7-4 &7-5.
d. When the average is displayed, press the
"MEM" button, the most recent result will be
displayed. See picture 7-6. Followed by,
the blood pressure and pulse rate will be shown
separately, and irregular heartbeat symbol
(if any) will blink, See picture 7-6 &7-7&7-8.
Press "MEM" button again to review the next
result, See picture 7-9. In this way, repeatedly
pressing the "MEM" button displays
the respective results measured previously.
e. When displaying the stored results,
the monitor will turn off automatically after
1 minute of no operation. You can
also press the button "START"
to turn off the monitor manually.

8. Deleting measurements from the memory

When any result (except average reading of the last three
results) is displaying, keeping on pressing button "MEM"
for three seconds, all results in the current memory bank
will be deleted after three "beep". LCD will show picture 8,
Press the button "MEM" or "START", the monitor will turn off.
ENGLISH
Picture 7-4
Picture 7-6
Picture 7-8
Picture 7-5
Picture 7-7
Picture 7-9
Picture 8