SATA jet 3000 B RP Instrucciones De Servicio página 446

<< Operating Instructions SATAjet 3000 B RP (DIGITAL) >>
EN
• When working with the spray gun, always limit solvents, paints or
other coating media to the quantities which are required for the paint
job! Excessive material must be returned to the designated storage
areas afterwards!
6.3. Personal protection equipment
• When using, cleaning or maintaining the spray gun, always wear
approved breathing and eye protection equipment as well as suitable
protective gloves, overalls and safety boots!
• When using the paint spray gun, noise levels of 85 dB(A) may be
exceeded. Wear suitable hearing protection!
The painter is not exposed to vibrations while using the spray gun. Repul-
sive forces are minimal.
6.4. Use in explosive areas
Ex-sign
6.4.1 General
The paint spray gun is approved for the use / storage in explosive areas
of Ex-Zone 1 and 2.
• The following applications and operations lead to the loss
of the explosion protection and are, therefore, prohibited:
• Use of the paint spray gun in explosive areas belonging to ex-zone 0!
XXVI.4
Danger! Notice!
Danger!
Equipment cat- Device category
egory
Danger! Risk of explosion!
Gas category Temperature level