Setting The Self-Cleaning Mode; Pyrolyse (Self-Clean) - Fulgor Milano F1SP24 2 Serie Manual De Uso Y Mantenimiento

17 - Setting the Self-Cleaning Mode

EN
Before using the Self-Cleaning Mode please read the Oven
Care and Cleaning page carefully and follow the Preparing
the Oven for Self-Cleaning first. (see page 19)

Pyrolyse (Self-Clean)

Turn the mode knob in the proper position than press the +/-
knob to start a cleaning cycle.
The clean time can be set according to the same rules of the
automatic functions, and therefore the pyrolitic cycle can be
delayed.
The maximum allowed clean time is 3 hours, the minimum 1
hour. The standard time is 1h:30min, the clock display shows
P1:30. At the end of the self-cleaning activity the display
shows P--- steady and flashing. The writings on the display
disappear when the mode selector is placed in the ZERO
position. The door remains locked until the oven temperature
drops below the safety threshold, at this time the control unlocks
the door.
The cooling fan starts as soon as the function is selected and
turns to its higher speed when the inner parts get hot. The oven
temperature is automatically set to 460°C in order to perfectly
clean the cavity.
The control also locks immediately the door in order to
guarantee the user safety, given that the temperature inside gets
very hot. A lock led shows the status of the latch mechanism
at any time:
- Door unlocked, lock led off.
- Door locked, lock led always on.
- Latch moving, transition in progress, lock led flashing.
To reuse the oven after a pyrolyse, turn the mode selector to
ZERO (OFF) position.
20