Language Selection; Coordinate Axis Selection - Pentax R-100 Serie Manual De Instrucciones

Followings are possible by this Function.:
A Language other than the English can be selected.
Coordinate axis can be selected.
Character input method can be selected.
The offset (remote) method can be selected.
Aiming on/off can be selected.
EDM(electronic distance meter) settings can be selected.
The factory default settings are "English" of LANGUAGE, "XYZ" of COORD. AXIS, "FULL TEMPLATE"
of INPUT METHOD, "FIXED PLANE" of REMOTE METHOD, "OFF" of REQUEST AIMING, MEAS. SHOT
of PRIM. MEAS KEY, TRACK CONT of SEC. MEAS KEY, COARSE of MEAS. MIN DISP(only R122/N,
R123/N), COARSE of TRACK MIN DISP, 1 TIME of SHOT COUNT, 01 TIME of SHOT INPUT.
The following preference menu is available:
There are 6 menus of the LANGUAGE, COORD.AXIS, INPUT METHOD, REMOTE METHOD, REQUEST
AIMING and EDM SETTINGS.
Press [F4][PREF] of the PowerTopoLite screen to view the PREFERENCE screen.
PREFERENCE
1.LANGUAGE
2. COORD.AXIS
3. INPUT METHOD
4. REMOTE METHOD :FIXED PLANE
5. REQUEST AIMING : OFF

10.1 Language selection

Select 1. LANGUAGE and press the [ENT] key to view the LANGUAGE selection window.
Press the [ENT] key to select and press [F5][ACCEPT] to enter.

10.2 Coordinate axis selection

Select 2. COORD.AXIS by pressing the down arrow key, and press the [ENT] key to view the COORD
AXIS selection window. Press the [ENT] key to select and press [F5][ACCEPT] to enter.
10. PREFERENCE
:ENGLISH
:XYZ
: FULL TEMPLATE
ACCEPT
PREFERENCE
2. COORD.AXIS
3. INPUT METHOD
4. REMOTE METHOD :FIXED PLANE
5. REQUEST AIMING : OFF
6. EDM SETTINGS
LANGUAGE
1.LANGUAGE :ENGLISH
1.ENGLISH
2. COORD.AXIS :XYZ
2.YOUR LANGUAGE
1. ENGLISH
3. INPUT METHOD : FULL TEMPLATE
2. YOUR LANGUAGE
4. REMOTE METHOD :FIXED PLANE
5. REQUEST AIMING : OFF
COORD. AXIS
1.LANGUAGE
2. COORD.AXIS:
3. INPUT METHOD:
4. REMOTE METHOD:
5. REQUEST AIMING :
:
100
:XYZ
: FULL TEMPLATE
1.XYZ
2.YXZ
3.NEZ
4.ENZ
ACCEPT