Pentax R-100 Serie Manual De Instrucciones página 87

Press the [ENT] key to open the Z coordinate input screen and input.
Only in the case of fixed traverse,
End point coordinates setup screen is displayed.
(Input the PN , Coordinates and PC of the End point.)
After Z coordinate input, END POINT COORD. SETUP screen is viewed.
Input the PN, X, Y, Z Coordinates and PC name of the End point.
Press the [ENT] key to view the RESULT COORD. OF TRAVERSE screen.
" e / S " indication means " closing errors / total length ".
[F1] and [F2] keys indicate only corner points in order.
[F3] and [F4] keys indicate all points in order.
Press [F5][ACCEPT] to save the all corner, sideshot points, and known points.
START POINT COORD. SETUP
1. X:
2. Y: +00000000.000m
3. Z:
START POINT COORD. SETUP
1. X:
2. Y:
3. Z: +00000000.000m
END POINT COORD. SETUP
1. X:
2. Y:
3. Z:
LIST
END POINT COORD. SETUP
1. X:
2. Y:
3. Z: + 00000000.000m
RESULT COORD. OF TRAVERSE
PN XXXX
X +XXXXXXXX. XXX
Y +XXXXXXXX. XXX
Z +XXXXXXXX. XXX
e / s XX.XXX / XXXXX.XXX
86
CLEAR
CLEAR
ACCEPT
CLEAR
ACCEPT