Station Orientation - Pentax R-100 Serie Manual De Instrucciones

Input the PRESS value.
Can't be changed is displayed.
Press the [ENT] key.
Input ppm value.
Can't be changed is displayed.
TEMP, PRESS and ppm input depend on the Initial setting 1 ( AUTO, ATM INPUT, ppm INPUT, NIL).
Above Can't be changed
Press the [ENT] key and input the PC.
Press the [F1][SAVE] to save the inputted data.

4.6 Station Orientation

][
Press the [F5 ACCEPT] key to view the STATION POINT H. ANGLE SETUP screen.
Input your desired H.angle.
[INVERS] key
If you want to calculate direction angle, Press [F5][INVERS] key to jump to INVERSE function.
Input SP as station point, EP as back sight point.
Result angle is set here automatically by pressing [ENT] key at RESULT OF INVERSE screen.
Press [ENT] key after aiming back sight point.
Aim at the reference point and press the [ENT] key to view the MEASURE screen.
STATION POINT SETUP
1. PN
2. IH
3. TEMP :
4. PRESS :
5. ppm
SAVE
STATION POINT SETUP
1. PN
2. IH
3. TEMP :
4. PRESS :
5. ppm
SAVE
is shown at AUTO of the above.
PC
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
BS
STATION POINT SETUP
2. IH
3. TEMP :
4. PRESS :
5. ppm
6. PC
SAVE
STATION POINT H. ANGLE SETUP
H. angle
MEASURE
PN
PH
H.angle
V.angle
S.dst
MEAS
27
: XXXXX
: 000X.X00 m
27 C
Can' be changed
: 16 ppm
: XXXXX
: 000X.X00 m
27 C
994 hpa
: Can't be changed
: 000X.X00m
27 C
994 hpa
: 16 ppm
: XXXXX
xxx° xx' xx"
INPUT 0 SET HOLD
POT3
1.200 m
xxx° xx' xx"
xx° xx' xx"
ME/SAVE
SAVE EDIT
ACCEPT
ACCEPT
SP
SELECT
ACCEPT
INVERS
PAGE