Output To The Pc - Pentax R-100 Serie Manual De Instrucciones

Set the PC to be ready to send and press the [ENT] key to receive the data from the PC
.

9.2 Output to the PC

The data stored in the internal memory is sent to the PC etc.
[ RECT. DATA]
Select the 2. SEND RECT. DATA by pressing the down arrow key, and press the [ENT] key to view the
FORMAT SELECTION screen.
Select DC1 format and press the [ENT] key to view the DATA SEND. CONFIRMATION screen.
( Same procedure is performed at CSV )
Press the [ENT] key, and set the PC to be ready to receive.
[POLAR DATA]
Select the 3. SEND PLAR DATA by pressing the down arrow key, and press the [ENT] key to view the
FORMAT SELECTION screen.
...
RECEIVING
Storable points:
TRANSFER
1. RECEIVE RECT.DATA
2. SEND RECT. DATA
3. SEND POLASR DATA
4. COMMUNICATION SETUP
FORMAT SELECTION
1. DC1
2. CSV
DATA SEND. CONFIRMATION
TOKYO
After pressing [ENT],
set the PC ready to receive !
SENDING....
Remaining points:
FORMAT SELECTION
1. DC1
2. AUX
94