Stationing By Two Known Points - Pentax R-100 Serie Manual De Instrucciones

Press [F1][NEXT] to view KNOWN POINT COORD. SETUP screen.
DEVIATIONS OF THE POINT: Four points or more points are needed to view this.
Press the [ENT] key to view the DEVIATIONS OF THE POINT screen. The deviations of X, Y and Z
coordinate of each point are displayed. For each point, you can decide if you want to accept or
reject the point.
PN: Current point number
dX: Deviation on the X value
dY: Deviation on the Y value
dZ: Deviation on the Z value
6.2

Stationing by two known points

(One point must be measured at least to gain the Station Coordinates.)
Press [F4][FREE] of the PowerTopoLite screen to view the IH input screen.
Input the IH value.
Aim at the Point 1.
Press the [ENT] key to open the PN, X, Y, Z, HI and PC input window and input each value.
Then, press the [ENT] key to view the MEASURE screen.
RESULT COORD. OF STATIONING
PN
HI
X
Y
Z
NEXT VIEW
KNOWN POINT COORD. SETUP
.1.PN :
2. X: + 00000000.000 m
3. Y: + 00000000.000 m
4. Z: + 00000000.000 m
5. HI: 0000.000 m
SAVE LIST
DEVIATIONS OF THE POINT
PN POT4
HI
dX
dY
dZ
REJECT
IH
KNOWN POINT COORD. SETUP
1.PN :
2. X: + 00000000.000 m
3. Y: + 00000000.000 m
4. Z: + 00000000.000 m
5. HI: 0000.000 m
SAVE LIST
MEASURE
1 POT1
HI
H.angle
V.angle
H.dst
MEAS TARGET
35
ACCEPT
ACCEPT
ACCEPT
0001.500m
CLEAR
ACCEPT
EDIT DISP