Pentax R-100 Serie Manual De Instrucciones página 62

Select 1. C1 and press [ENT] key to view C1 screen.
C1 ( Center 1 ) point is center point of Arc 1.
Input PN ( Point Name ), X, Y, Z, and PC ( Point Code ) of C1 point or import from the memory of
rectangular coordinate as C1 by [F2][LIST] key.
If you finish the input of C1 value, press [F5][ACCEPT] key. Then you go to R1 input screen.
Input the radius of Arc 1 as R1 value . If you finish the input of R1, press [F5][ACCEPT] key. Then you
go to C2 input screen.
C2 ( Center 2 ) point is center point of Arc 2.
Input PN ( Point Name ), X, Y, Z, and PC ( Point Code ) of C2 point or import from the memory of
rectangular coordinate as C2 by [F2][LIST] key.
If you finish the input of C2 value, press [F5][ACCEPT] key. Then you go to R2 input screen.
Input the radius of Arc 2 as R2 value. If you finish the input of R2, press [ENT] key. Then you go to
RESULT OF LINE-ARC INTERSECTION screen.
C1
1. PN:
2. X:
3. Y:
4. Z:
5.PC:
SAVE LIST
R1
0000.000m
C2
1. PN:
2. X:
3. Y:
4. Z:
5.PC:
SAVE
LIST
R2
0000.000m
61
ACCEPT
CLEAR
ACCEPT
CLEAR