Request Aiming Selection; Edm Settings Selection - Pentax R-100 Serie Manual De Instrucciones

10.5 Request aiming selection

Select 5. REQUEST AIMING and press the [ENT] key to view the REQUEST AIMING selection window.
Press the [ENT] key to select and press [F5][ACCEPT] to enter.
Pressing the [ENT] key after entering the Horizontal angle, the AIM AT THE REFERENCE
POINT screen is viewed when 1. ON is selected and not viewed when 2. OFF is selected
without Coordinates input of BSP.

10.6 EDM settings selection

Select 6. EDM SETTINGS and press the [ENT] key to view the EDM SETTINGS selection window. Press
the [ENT] key to select and press [F5][ACCEPT] to enter.
EDM SETTINGS
1. PRIM. MEAS KEY : MEAS. SHOT
2. SEC. MEAS KEY : TRACK CONT
3. TRACK MIN DISP. : COARSE
4. SHOT COUNT
5. SHOT INPUT
Please refer to the instruction manual of basic function about details of each settings.
: 1 TIME
: 01 TIMES
ACCEPT
1. PRIM. MEAS KEY
2. SEC. MEAS KEY
3. MEAS. MIN DISP
4. TRACK. MIN DISP
5. SHOT COUNT
1.ON
2.OFF
AIM AT THE REFERENCE POINT.
Aim at the reference point
Press [ENT] when ready.
ESC
( Only R-122/N, 123/N )
EDM SETTINGS
1. PRIM. MEAS KEY : MEAS. SHOT
2. SEC. MEAS KEY : TRACK CONT
3. MEAS. MINI DISP :COARSE
4. TRACK MIN DISP. : COARSE
5. SHOT COUNT : 1 TIME
6. SHOT INPUT : 01
1. MEAS. SHOT
2. MEAS. CONT
3. TRACK SHOT
4. TRACK CONT
1. TRACK CONT
2. TRACK SHOT
3. MEAS. CONT
4. MEAS. SHOT
1. COARSE
2. FINE
1. COARSE
2. FINE
1. 1 TIME
2. 3 TIMES
3. 5 TIMES
4. INPUT
104
ENT
TIMES
ACCEPT
( Only R-122/N, 123/N )