Li-Ion Battery Charge State Display; Items Supplied; Technical Data; Before Use - Hilti PR 3-HVSG A12 Manual De Instrucciones Original

Ocultar thumbs Ver también para PR 3-HVSG A12:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 51
3.5

Li-ion battery charge state display

The Li-ion battery features a state of charge display.
Status
4 LEDs light.
3 LEDs light.
2 LEDs light.
1 LED lights.
1 LED blinks.
When the tool is in operation, the battery charge status is indicated in the display on the tool.
When not in operation, battery charge state can be indicated by lightly pressing the release button.
During charging, charge state is indicated by the LEDs on the battery (please refer to the operating
instructions for the charger).
3.6

Items supplied

PR 3-HVSG A12 rotating laser,
manufacturer's certificates, operating instructions.
You can find other system products approved for your product at your local Hilti Center or online at:
www.hilti.com.
4

Technical data

Receiving range (diameter)
Communication range (PRA 2)
Accuracy at 10 m (under standard ambient con-
ditions in accordance with MIL­STD­810G)
Laser class
Operating temperature
Storage temperature
Weight (including B12/2.6 battery)
Drop test height (under standard ambient condi-
tions in accordance with MIL­STD­810G)
Tripod thread
Protection class in accordance with IEC 60529
5

Before use

5.1
Handling the laser and battery correctly
▶ Fig. 1: Working in horizontal mode.
▶ Fig. 2: In inclined plane mode, the laser should be lifted at the control panel side.
▶ Fig. 3: Laying down or transporting in an inclined position.
▶ Hold the laser so that the battery compartment does NOT face upwards, so that no moisture can
enter.
The B12 battery has no protection class. Do not expose the battery to rain or wet conditions. In
accordance with the Hilti instructions, the battery may be used only with the associated product
and must be inserted in the battery compartment for this purpose.
*2154000*
Meaning
Charge status: 75 % to 100 %
Charge status: 50 % to 75 %
Charge status: 25 % to 50 %
Charge status: 10 % to 25 %
Charge status: < 10 %
PRA 2 remote control, PRA 54 target plate, 2 batteries (size AA), 2
150 m
30 m
±1 mm
Visible, laser class 2, 510-530 nm/Po<4.85 mW ≥
300 ⁄min; EN 60825-1:2007; IEC 60825-1:2007
−10 ℃ ... 50 ℃
−25 ℃ ... 63 ℃
2.4 kg
1.5 m
5/8 in
IP 56
4
2154000
English
17

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Pr 3-hvsg

Tabla de contenido