Mounting The Loop Handle - Stihl FS 94 R Manual De Instrucciones

3 STIHL AutoCut C 26-2
4 STIHL FixCut 31-2
5 STIHL DuroCut 20-2
6 STIHL PolyCut 20-3
Metal cutting attachment
7 Grass cutting blade 230-4
(Ø 230 mm)
8 Grass cutting blade 230-8
(Ø 230 mm)
WARNING
Grass cutting blades of materials other
than metal must not be used.
Deflectors
9 Guard with blade for mowing heads
10 Deflector with
11 skirt and blade for mowing heads
12 Deflector without skirt and blade for
metal mowing heads
Handle
13 Loop handle
14 Loop handle with
15 Clip (barrier bar)
Harnesses
16 Shoulder strap can be used
17 Shoulder strap must be used
18 Full harness can be used
FS 94 R
WARNING
Based on the cutting attachment being
used:
Choose the proper deflector in order to
reduce the risk of injury from thrown
objects and contact with the cutting
attachment.
Make sure your unit is equipped with the
proper handle and harness in order to
reduce the risk of injury from loss of
control and contact with the cutting
attachment: use grass cutting metal
blades on this unit only if equipped with
a bike handle or a loop handle with
barrier bar.
Do not use rigid plastic blades, brush
knifes or circular saw blades on this unit.

Mounting the Loop Handle

Using the Barrier Bar
A barrier bar may have to be mounted to
suit the tool you intend to use – see
"Approved Combinations of Cutting
Attachment, Deflector, Handle and
Harness".
The barrier bar comes standard with the
machine or is available as a special
accessory.
English
17