Precautionary Labels; Product Components; Product Overview - Hach LANGE Manual Del Usuario

N O T I C E
Indicates a situation which, if not avoided, may cause damage to the instrument.
Information that requires special emphasis.

Precautionary labels

Read all labels and tags attached to the instrument. Personal injury or
damage to the instrument could occur if not observed. A symbol on the
instrument is referenced in the manual with a precautionary statement.
This symbol, if noted on the instrument, references the instruction
manual for operation and/or safety information.
This symbol indicates that a risk of electrical shock and/or
electrocution exists.
This symbol indicates the presence of devices sensitive to Electro-
static Discharge (ESD) and indicates that care must be taken to
prevent damage with the equipment.
Electrical equipment marked with this symbol may not be disposed of
in European public disposal systems after 12 August of 2005. In
conformity with European local and national regulations (EU Directive
2002/96/EC), European electrical equipment users must now return
old or end-of-life equipment to the Producer for disposal at no charge
to the user.

Product overview

The analyzer is a fully digital communication system based on the open
Modbus standard. When a Profibus interface card is installed, the
analyzer can be configured to give the full range of standardized method
values and parameters.
The analyzer is compatible with master class 1 (PLC SCADA) and
master class 2 systems, e.g., engineering stations.
An overview of the system is shown in
card is available as a factory or user-installed item.
4 English
Figure 1. The Profibus interface
Figure 1 System overview
1 Analyzer
2 Programmable logic controller
(Master class 1)

Product components

Make sure that all components have been received. Refer to
any items are missing or damaged, contact the manufacturer or a sales
representative immediately.
3 PC with software (Master class
2 e.g. PC with CP5611 card
installed)
Figure 2. If