Preparing A Bluetooth Device; Cde-172Bt/ Ute-73Bt Only) - Alpine CDE-175BT Manual De Operación

Preparing a BLUETOOTH Device

(CDE-175BT/ CDE-172BT/ UTE-
73BT only)
You can enjoy music, or perform handsfree
calling depending on the BLUETOOTH
compatible device such as a smartphone, cellular
phone and audio device (hereafter "BLUETOOTH
device" if not otherwise specified). For details on
connecting, refer to the operating instructions
supplied with the device.
Before connecting the device, turn down the
volume of this unit; otherwise, loud sound may
result.
Connecting with a Smartphone by One
touch (NFC) (CDE-175BT only)
By touching the control dial on the unit with an
NFC* compatible smartphone, the unit is paired
and connected with the smartphone
automatically.
* NFC (Near Field Communication) is a technology
enabling short-range wireless communication between
various devices, such as mobile phones and IC tags.
Thanks to the NFC function, data communication can
be achieved easily just by touching the relevant symbol
or designated location on NFC compatible devices.
For a smartphone with Android OS 4.0 or lower
installed, downloading the app "NFC Easy
Connect" available at Google Play™ is required.
The app may not be downloadable in some
countries/regions.
1
Activate the NFC function on the
smartphone.
For details, refer to the operating instructions
supplied with the smartphone.
2
Touch the N-Mark part of the unit with
the N-Mark part of the smartphone.
Make sure that lights up on the display of
the unit.
To disconnect by One touch
Touch the N-Mark part of the unit with the
N-Mark part of the smartphone again.
Notes
• When making the connection, handle the smartphone
carefully to prevent scratches.
• One touch connection is not possible when the unit is
already connected to two NFC compatible devices. In
this case, disconnect either device, and make
connection with the smartphone again.
Pairing and connecting with a
BLUETOOTH device
When connecting a BLUETOOTH device for the
first time, mutual registration (called "pairing") is
required. Pairing enables this unit and other
devices to recognize each other. This unit can
connect two BLUETOOTH devices (two cellular
phones, or a cellular phone and an audio device).
1
Place the BLUETOOTH device within
1 m (3 ft) of this unit.
2
Press and hold /SETUP for at least 2
seconds, rotate the control dial to select
[BLUETOOTH], then press it.
3
Rotate the control dial to select
[PAIRING], then press it.
4
Rotate the control dial to select [SET
DEVICE 1]* or [SET DEVICE 2]*, then press
it.
flashes while the unit is in pairing standby
mode.
* [SET DEVICE 1] or [SET DEVICE 2] will be changed to
the paired device name after pairing is complete.
5
Perform pairing on the BLUETOOTH
device so it detects this unit.
11
-EN