Playing A Bluetooth Device; Cde-172Bt/ Ute-73Bt Only) - Alpine CDE-175BT Manual De Operación

Ocultar thumbs Ver también para CDE-175BT:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

• Playback of the following files is not supported.
MP3/WMA/FLAC/AAC*:
– copyright-protected files
– DRM (Digital Rights Management) files
– Multi-channel audio files
MP3/WMA/AAC*:
– lossless compression files
* CDE-175BT/ CDE-172BT/ UTE-73BT only
Before making a connection, select the USB
mode (Android mode or MSC/MTP mode)
depending on the USB device (page 24).
1
Connect a USB device to the USB port
(page 13).
Playback starts.
If a device is already connected, to start
playback, press SOURCE
([IPD] appears in the display when the iPod is
recognized) (CDE-175BT/ CDE-172BT/ UTE-
73BT only).
2
Adjust the volume on this unit.
To stop playback
Press and hold SLEEP for 2 seconds.
To remove the device
Stop playback, then remove the device.
Caution for iPhone
When you connect an iPhone via USB, phone call
volume is controlled by the iPhone, not the unit.
Do not inadvertently increase the volume on the
unit during a call, as a sudden loud sound may
result when the call ends.
to select [USB]

Playing a BLUETOOTH Device

(CDE-175BT/ CDE-172BT/ UTE-
73BT only)
You can play contents on a connected device
that supports BLUETOOTH A2DP (Advanced
Audio Distribution Profile).
1
Make BLUETOOTH connection with the
audio device (page 11).
To select the audio device, press and hold
SETUP for at least 2 seconds, then select
[BLUETOOTH]
[AUDIO DEVICE] (page 26).
2
Press SOURCE
to select [BT AUDIO].
3
Operate the audio device to start
playback.
4
Adjust the volume on this unit.
Notes
• Depending on the audio device, information such as
title, track number/time and playback status may not
be displayed on this unit.
• Even if the source is changed on this unit, playback of
the audio device does not stop.
To match the volume level of the
BLUETOOTH device to other sources
Start playback of the BLUETOOTH audio device at
a moderate volume, and set your usual listening
volume on the unit.
Press and hold
/SETUP for at least 2 seconds,
then select [AUDIO]
[BTA VOL] (page 25).
/
17
-EN

Hide quick links:

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Cde-172btCde-170Ute-73bt

Tabla de contenido