Installation - Alpine CDE-175BT Manual De Operación

Installation

Removing the protection collar and the
bracket
Before installing the unit, remove the protection
collar and the bracket
1
Pinch both edges of the protection collar
, then pull it out.
2
Insert both release keys
click, and pull down the bracket
pull up the unit to separate.
Face the hook inwards.
Mounting the unit in the dashboard
• Before installing, make sure the catches on
both sides of the bracket
mm (3/32 in).
• For Japanese cars, see"Mounting the unit in a
Japanese car" (page 43).
1
Position the bracket
dashboard, then bend the claws outward
for a tight fit.
from the unit.
until they
, then
are bent inwards 2
inside the
53 mm (2 1/8 in)
2
Mount the unit onto the bracket
attach the protection collar
Notes
• If the catches are straight or bent outwards, the unit will
not be installed securely and may spring out.
• Make sure the 4 catches on the protection collar
properly engaged in the slots of the unit.
Mounting the unit in a Japanese car
You may not be able to install this unit in some
makes of Japanese cars. In such a case, consult
your Alpine dealer.
TOYOTA
to dashboard/center console
Bracket
Existing parts supplied
with your car
182 mm (7 1/4 in)
Catch
, then
.
are
Bracket
43
-EN