Listening To The Siriusxm Radio; Cde-172Bt Only) - Alpine CDE-175BT Manual De Operación

Listening to the SiriusXM Radio

(CDE-175BT/ CDE-172BT only)
Activating your SiriusXM Subscription
Only SiriusXM® brings you more of what you love
to listen to, all in one place. Get over 140
channels, including commercial-free music plus
the best sports, news, talk, comedy and
entertainment. Welcome to the world of satellite
radio. A SiriusXM Connect Vehicle Tuner and
Subscription are required. For more information,
visit
www.siriusxm.com
After installing your SiriusXM Connect Vehicle
Tuner and antenna, press SOURCE
[SIRIUS XM]. You should be able to hear the
SiriusXM preview channel on Channel 1. After
verifying that you can hear the preview channel,
select Channel 0 to find the Radio ID of your
tuner. In addition, the Radio ID is located on the
bottom of the SiriusXM Connect Vehicle Tuner
and its packaging. You will need this number to
activate your subscription. Write the number
down for reference.
Note
The SiriusXM Radio ID does not include the letters I, O, S
or F.
In the USA, you can activate online or by calling
SiriusXM Listener Care:
• Online: Visit
www.siriusxm.com/activatenow
• Phone: Call 1-866-635-2349
In Canada, you can activate online or by calling
SiriusXM Listener Care:
• Online: Visit
www.siriusxm.ca/activatexm
• Phone: Call 1-877-438-9677
As part of the activation process, the SiriusXM
satellites will send an activation message to your
tuner. When your radio detects that the tuner has
received the activation message, your radio will
display: [SUBSCRIPTION UPDATED - PRESS ENT
TO CONTINUE]. Once subscribed, you can tune to
channels in your subscription plan.
Notes
• The activation process usually takes 10 to 15 minutes,
but may take up to an hour.
• Your radio will need to be turned on and receiving the
SiriusXM signal to receive the activation message.
Selecting channels for SiriusXM
1
Press
2
Rotate the control dial to select
[CHANNEL], then press it.
3
Rotate the control dial to select the
desired channel, then press it.
To select channels from categories
1
Press
to select
2
Rotate the control dial to select [CATEGORY], then
press it.
3
Rotate the control dial to select the desired
category, then press it.
The channel list appears.
4
Rotate the control dial to select the desired
channel, then press it.
To store channels
1
While receiving the channel that you want to
store, press and hold a number button (1 to 6)
until [MEM] appears.
To receive the stored channel, press
select [SX1], [SX2] or [SX3], then press a number
button (1 to 6).
(browse).
(browse).
/A.ME to
15
-EN