Settings; Canceling The Demo Mode; Basic Setting Operation; General Setup (General) - Alpine CDE-175BT Manual De Operación

Settings

Canceling the DEMO Mode

You can cancel the demonstration display which
appears when the source is off and the clock is
displayed.
1
Press and hold
second, rotate the control dial to select
[GENERAL], then press it.
2
Rotate the control dial to select [DEMO
MODE], then press it.
3
Rotate the control dial to select [DEMO
OFF], then press it.
The setting is complete.
4
Press (back) twice.
The display returns to normal reception/play
mode.

Basic Setting Operation

You can set items in the following setup
categories:
General setup (GENERAL), Audio setup (AUDIO),
Display setup (DISPLAY), BLUETOOTH setup
(BLUETOOTH)
1
Press and hold
seconds.
2
Rotate the control dial to select the setup
category, then press it.
The items that can be set differ depending on
the source and settings.
3
Rotate the control dial to select the
options, then press it.
To return to the previous display
Press (back).
24
-EN
/SETUP for at least 2
/SETUP for at least 2

General Setup (GENERAL)

DEMO MODE (demonstration)
Activates the demonstration: [ON], [OFF].
CLOCK ADJ (clock adjust) (page 10)
CAUTION ALM (caution alarm)
Activates the caution alarm: [ON], [OFF] (page
10).
(Available only while the source is off and the
clock is displayed.)
BEEP
Activates the beep sound: [ON], [OFF].
AUTO OFF
Shuts off automatically after a desired time
when the unit is turned off: [ON]
(30 minutes), [OFF].
USB MODE
Changes the USB mode: [MSC/MTP],
[ANDROID].
(Available only when the USB source is
selected.)
RDS CT (clock time)
Activates the CT function: [ON], [OFF].
SXM PARENTAL (CDE-175BT/ CDE-172BT only)
Sets the parental lock to [ON], [OFF], and edits
the passcode (page 16).
(Available only when SiriusXM is selected.)
SMX SIGNAL (CDE-175BT/ CDE-172BT only)
Displays the current status of the SiriusXM
signal strength:[NO SIGNAL] (signal level 0),
[WEAK] (signal level 1), [GOOD] (signal level 2),
[EXCELLENT] (signal level 3).
(Available only when SiriusXM is selected.)
SXM RESET (CDE-175BT/ CDE-172BT only)
Initializes the SiriusXM Connect Vehicle Tuner
settings (preset channels/parental lock): [YES],
[NO].
(Available only when SiriusXM is selected.)
FIRMWARE
(Available only while the source is off and the
clock is displayed.)
Checks/updates the firmware version. For
details, consult your nearest Alpine dealer.
FW VERSION (firmware version)
Displays current firmware version.