CRANKCASE COVER AND CAMSHAFT
1
3
5
6
4
2
VALVE LIFTER INSPECTION
1. Inspect:
• Valve lifter
Damage → Replace.
SVU3520J
CAMSHAFT ASSEMBLY
1. Install:
• Camshaft 1
CAUTION:
Be sure to align the hole a in the camshaft
gear with the crankshaft gear mark b.
SVU3530J
CRANKCASE COVER INSPECTION
1. Inspect:
• Crankcase cover 1
1
Damage → Replace.
2
• Bearing 2
Noise/wear/rotational failure →
Replace.
SWL3380J
CRANKCASE COVER INSTALLATION
1. Install:
• Crankcase cover bolts 1 to 6
NOTE:
Tighten the bolts to the specified torques in
two steps and in order from 1 to 6.
SWL3390J
3-36
ENG
Crankcase cover bolts:
1st: 12 Nm (1.2 m · kg, 8.7 ft · lb)
2nd: 22 Nm (2.2 m · kg, 16 ft · lb)