Yamaha EF3000iSE Manual De Servicio página 74

FUSES
4. Check:
• Fuses
Checking steps:
• Connect the pocket tester (Ω × 1) to a fuse
and check the continuity.
NOTE:
Set the pocket tester selector to "Ω × 1"
Pocket tester:
YU-03112-C, 90890-03112
• If the pocket tester indicates "∞", replace
the fuse.
5. Replace:
• Blown fuse
Replacing steps:
• Set the main switch to "STOP" "
• Install a new fuse of the correct amperage.
• Set the main switch to "ON" "
ify if the electrical circuit is operational.
• If the fuse immediately blows again, check
the electrical circuit.
Fuse amperage:
10 A
WARNING
Never use a fuse with an amperage other
than that specified. Improvising or using a
fuse with the wrong amperage rating may
cause extensive damage to the electrical
system and could possibly cause a fire.
6. Install:
• Fuse (spare)
• Fuse
• Starter relay
7. Install:
• Battery
• Battery band
• Battery bracket
8. Install:
• Cover 5
Refer to "COVERS, PANELS, AND
CAPS".
2-24
INSP
ADJ
".
" and ver-