Yamaha EF3000iSE Manual De Servicio página 80

BATTERY ELECTROLYTE
a. Place the battery on a level surface.
b. Remove the sealing sheet 1.
2 Filler port
SWL2320J
c. Take the electrolyte container out of the
vinyl bag.
d. Detach the strip of caps (used as battery
plugs) 1.
2 Six sealed areas of container
NOTE:
Do not lose the strip of caps because it will be
used as battery plugs.
SWL2330J
CAUTION:
Do not peel or pierce the sealed areas.
e. Turn the electrolyte container upside
down with the six sealed areas in line with
the six filler ports of the battery.
f. Push the container down strongly enough
to break the seals. The electrolyte will
start to flow into the battery.
CAUTION:
• Do not tilt the container as the electrolyte
SWL2340J
may stop flowing.
• Never remove the container from the bat-
tery until all electrolyte has drained from
the container.
2-27
INSP
ADJ