Safety Regulations; Introduction; Symbols And Warning Notes - Heiniger ONE/E Instrucciones De Uso

1 Safety regulations

1.1 Introduction

• This chapter describes the safety regulations that are to be taken
into consideration as a matter of course when using the shearing
plant.
• All persons who carry out work on and with the shearing
plant must read the operating instructions.
• The operating instructions are to be kept in a secure place
that is accessible at all times.
• Authorised service agents may only carry out service and repair
work.

1.2 Symbols and warning notes

Various symbols are used in the operating instructions. These sym-
bols indicate possible hazards or bring to the user's attention such
technical information that, if not complied with, may lead to perso-
nal injury and material damage or to uneconomic operation.
Hazard symbols
Warning
Denotes a possibly hazardous situation. Serious injury and even
death can result if such situations are not avoided.
Caution
Denotes a possibly hazardous situation. Light or slight injury can
result if such situations are not avoided.
Information symbols
Note
A note which, if not complied with, can lead to operational stop-
pages or damage.
Diagram note
This symbol, complete with diagram number, denotes the corre-
sponding diagram at the end of the operating instructions.
ONE Shearing Plant – Instruction Manual 3