Publicidad
Idiomas disponibles
Idiomas disponibles
Attach the monitor (1) using screws
(2), Fig.4, making sure not to pinch the
wires. Then attach the monitor cover
(3) using screws (4) Fig.4.
5. FITTING THE FOCUS BARS.-
Bring the left focus bar (119) (marked
with the letter L) to the main frame
(14). Use wrench to tighten. Go
through the same assembly procedure
with the right focus bar (118) Fig.5.
Join the left side shaft (81) with the left
focus bar (119) using the screw (5),
the nut (6) and the bushing (7). Go
through the same assembly procedure
with the right side shaft Fig.5.
6. FITTING THE SEAT POST.-
Assemble the seat (77) to the seat rail
tube (78). Insert the seat post (75) in
the main frame (14), choose the
desired
position
adjustable knob (16). Ensure that the
knob is always tightened Fig.6.
Remarks: When you have chosen a
desired position, tighten the seat post
knob until you hear a "click".
IMPORTANT: It is advisable to
retighten these screws after one
month of using the machine.
and
tighten
the
LEVELLING.-
Once the unit has been placed into its
final position, make sure that it sits flat
on the floor and that it is level. This
can be achieved by screwing the
adjustable feet up or down, as shown
in Fig.7.
MOVEMENT & STORAGE.-
The unit is equipped with wheels
(107), as shown in Fig.8, which make
it easier to move.
The two wheels at the front of the unit
make it easier to place the unit in to
any chosen position by lifting the rear
slightly Fig.8.
Store your unit in a dry place,
preferably not subject to changes in
temperature.
Do not hesitate to get touch with the
Technical Assistance Service if you
have any queries by phoning customer
services (see last page in manual)
BH RESERVES THE RIGHT TO
MODIFY THE SPECIFICATIONS OF
ITS PRODUCTS WITHOUT PRIOR
NOTICE.
13
Publicidad
