Accessory And Software Information; Specific Absorption Rate (Sar) - Crosscall CORE-X3 Manual Del Usuario

ACCESSORIES AND SOFTWARE INFORMATION
We recommend that you use the following accessories:
ACCESSORY
CHARGER
EARPHONES
USB TYPE C CABLE
The product software version is L1501.X.XX.XX.XXXX (where X=0 to 9, A to Z, representing
updates to the user experience, security patches, etc.). Software updates are published
by the manufacturer to correct bugs or improve features after the product launch. All the
software versions published by the manufacturer have been verified and always comply
with the applicable regulations.
Not all the radio frequency settings (for example, the frequency band and output power)
are accessible by the user or can be modified by him/her. The latest information relating
to accessories and software is available in the Declaration of Conformity, which can be
viewed on the website:

SPECIFIC ABSORPTION RATE (SAR)

• This device complies with the directives relating to radio frequency exposure, when it
is used near the head or at a minimum distance of 5mm from the body. According to
ICNIRP guidelines, the SAR limit is 2.0 watts/kg for head and body, and 4.0 watts/kg for
limbs on average for 10g of cellular tissue absorbing the majority of frequencies.
Maximum values for this model:
• SAR Head: 1.528 (W/kg) ==> authorised limit value: 2 (W/kg)
• SAR Body: 1.363 (W/kg) ==> authorised limit value: 2 (W/kg)
• SAR Limbs: 2.495 (W/kg) ==> authorised limit value: 4 (W/kg)
CORE-X3, designed in France and assembled in China
Created and imported by: CROSSCALL – 245 RUE PAUL LANGEVIN 13290 AIX EN Pce –
France
Please visit the www.crosscall.com website for the complete version of the user guide.
MODEL
Trademark: Crosscall
EU Model:
CSCX3.BK.NN0EU
A121A-050200U-EU3
UK Model:
CSCX3.BK.NN0UK
ECCX3.BK.NN000
CCCX3.BK.NN000
63
TECHNICAL DATA
Input voltage : 100-240V
Input AC frequency : 50/60Hz
Output voltage : 5.0V
Output current : 2.0A
Output power : 10.0W
Average active efficiency : 80%
Efficiency at low load (10%) : N/A
No-load power consumption :
0.084W
IPX6
2.0