Commissioning; Programming The Rts Transmitter; Checking The Rotation Direction; Adjusting The End Limits - SOMFY Sonesse 40 RTS Manual De Instrucciones

3 Commissioning

3.1 Programming the RTS transmitter

Switch on the power supply.
Press the UP and DOWN buttons simultaneously
on the RTS transmitter: the jogs (move up
and down briefly) and the transmitter is
preprogrammed in the motor

3.2 Checking the rotation direction

1) Press the RTS transmitter UP button:
a) If the shade is raised (a), the rotation direction
is correct: move to the section entitled «Adjusting
the end limits».
b) If the shade is lowered (b), the rotation
direction is incorrect: move to the next step.
2) Press the RTS transmitter MY button until
the shade jogs: the rotation direction has been
modified.
3) Press the RTS transmitter UP button
to check the rotation direction.

3.3 Adjusting the end limits

The limits can be set in any sequence.
1) Press and hold the UP button to move the
shade to the desired Up position. If necessary
adjust the Up position, using the UP or DOWN
buttons.
2) Press the MY and DOWN buttons
simultaneously and release them once the shade
begins to move. The Up limit is memorized.
3) Press the MY button when it reaches the
desired Down position.
If necessary adjust the Down position, using the
UP or DOWN buttons.
4) Press the MY and UP buttons simultaneously
and release them when the shade begins to
move.
The Down limit is memorized. The shade moves
up and will stop at its upper limit.
5) To confirm the end limits press and hold the
MY button until the shade jogs. The end limits
are recorded.
6 Copyright © 2011-2016 Somfy Activités SA. All rights reserved
1
a
=
b
=
2
1
3
5
3
2
4