Samsung LN-S2738D Manual Del Usuario página 13

Connecting a DVD Player/Set-Top Box via HDMI
This connection can only be made if there is an HDMI Output connector on the ex/crnat device.
DVD Player/Set-Top Box
TV Rear Panel
®®
Connect an HDMI Cable
between the HDMI/DVI 1
or HDMI/DVI 2 connec-
tor on the TV and the
HDMI connector on the
DVD player/Set-Top Box.
What is HDMI?
- HDMI, or high-definition multimedia interface, is a next-generation interface that enables the
transmission of digital audio and video signals using a single cable without compression.
- "Multimedia interface" is a more accurate name for it especially because it allows multiple channels of
digital audio (5.1 channels).
The difference between HDMI and DVl is that the HDMI device is smaller in size, has the HDCP
(High Bandwidth Digital Copy Protection) coding feature installed, and supports multi-channel
digital audio.
:_ Each DVD playedSet-top box has a different back panel configuration.
When connecting a DVD player/Set-top box, match the color of the connection terminal to the cane.
Connecting a Digital Audio System
The rear panel jacks on your TV make it easy to connect a Digital Audio Sys/cm to your TV.
Digital Audio System
®
What is OPTICAL?
- Converts the electric signal into an optical light signal, and transmits it through glass fibers. S/PDIF
is a transmission system of digital audio in the form of a light wave that uses a glass conductor.
1, Connect an Optical
Cable between the DIGI-
TAL AUDIO OUT
(OPTICAL) jacks on the
TV and the Digital Audio
Input jacks on the Digital
Audio System.
When a Digital Audio
System is connected to
the "DIGITAL AUDIO
OUT (OPTICAL)" termi-
nal: Decrease the gain
(volume) of the TV, and
adjust the volume level
with the system's vol-
ume control.
:_ 5.1CH audio is possible when the TV is connected to an extemN device supporting 5.1CH.
_'- Each Digital Audio System has a different back panel configuration.
English 11