Labeling
Channels
1.
Press the MENU button to display the menu.
Press the ._ or _ buttons to select "Channel", then press the ENTER button.
Press the _ or _ buttons to select "Name", then press the ENTER button.
2,
Press the _ or _ buttons to select the channel to be assigned a new name,
then press the ENTER button.
Press the _ or _ buttons to select a letter, a number or a blank
(Results in this sequence: A...Z, 0...9, +, -, *,/, blank).
Press the _. button to switch to the next field, which will be selected.
Select a second letter or digit by pressing the _ or _ buttons, as above.
Repeat the process to select the last three digits. When you have finished,
press the ENTER button to assign the new name.
To erase the assigned new name, select "Clear" by pressing the 4 or
button, then press the ENTER button.
Press the EXIT button to exit.
_,- The names of digital broadcasting channels are automaticNly
assigned and thus
cannot be assigned by users.
Fine
Tuning
Analog
Channels
Use fine tuning to manually adjust a particular channel for optimal reception.
1.
Press the MENU
button to display the menu.
Press the _ or v buttons to select "Channel", then press the ENTER button.
2.
Press the _ or v buttons to select "Fine Tune", then press the ENTER button.
3,
4,
Press the _ or b, buttons to adjust the fine tuning.
If you do not store the fine-tunedchannelin memory,adjustmentsare not saved.
To store the fine tuning setting in the TV's memory, press the ENTER button.
To reset the fine tuning setting, press the _ button to select "Reset",
then press the ENTER button.
Press the EXIT button to exit.
_.- Only analogTV channelscan be fine tuned.
>
"*"
will appear next to the nameof fine-tunedchannels.
English 35