Installing the Wall Mount Kit (LN-S2738D)
This installation
is to be used w'hen attaching
the wall mnnnt
to a wail.
When attaching
to other building
materials,
please contact
your nearest dealer.
This LCD TV accepts
a 200 mm x 100 mm VESA-compliant
mnunting
interface
pad.
Components
(Sold separately)
M4 X L15
M4 X L20
O Wall-Bracket
!_ Set-Bracket
O Screw: 8 EA
ID Wood Screw: 4 EA
O Anchor: 4 EA
O Installation Guide
How to assemble
the Wall Mount Bracket
1 (!) Mark the location on the wall where the hole will be drilled.
® Make over 35 mm-depth-hole on the marked location using drill.
® Fix anchors O on each hole on the wall.
_
v
@ Connect wall-bracket O to the wall with wood screws O after fitting anchors @ into the wall-bracket O.
_"_
/_
Note: If the bracket is not firmly fixed to the wall, LCD TV can fall off.
;_-___
2 ® Turn the power off and unplug the power cord from the outlet.
@ Place the TV faced down on a soft cloth or cushion on a table.
® Attach the set-bracket O onto the rear side of the TV set and secure the screws O.
\/
3 (Z) Insert three Hangers of the set-bracket O into the grooves of the wall-bracket O.
@ Fix set-bracket t_ and walPbracket O with screws _.
Note: Before installing
the TV on the wall, first connect the cables.
English 57