Setting Up The Tv With Your Pc - Samsung LN-S2738D Manual Del Usuario

Setting up the TV with your PC
How to Auto Adiust
Use the Auto Adjust function to have the TV set automatically adjust the vide() signals the monitor receives.
"['he function also automatically fine tunes the settings and adjusts the Dequer*cy values and positions,
>'_ "['his function does not work in DVI Digital mode,
1. Press the MENU button to display the menu.
Press the _, or _ buttons to select "Setup", then press the ENTER button.
Press the ,,, or v buttons to select "PC", then press the ENTER button.
Changeto the PC modefirst.
2, Press the A or _ buttons to select "AutoAdjustment", then press the ENTER button.
Press the EXIT button to exit.
Adjusting the Screen Ouality
"['he purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning alone.
then do the frequency adjustments to the UtlllOg[and fine tune again. After the noise has been reduced, re adjust the picture so that
it is aligned on the center of the semen,
1. Press the MENU button to display the menu.
Press the ,,, or v buttons to select "Setup", then press the ENTER button.
Press the _- or _ buttons to select "PC", then press the ENTER button.
Changeto the PC modefirst.
2. Press the ENTER button to select "Image Lock".
3. Press the _ or - buttons to select "Coarse" or "Fine", then press the
ENTER button.
Press the + or + buttons to adjust the screen quality.
Vertical stripes may appear or the picture may be blurry.
Press the ENTER button.
Press the EXIT button to exit.
English 38