Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Memorizing
the Channels
Your TV can memorize and stnre all of/he available channels for both "ofleair" (an/enna) and cable channels.
After the available channels are memnrized, use/he CH @ or CH ® buttons to scan through/he channels.
This eliminates/he
need tn change channels by entering the channel digits. There are three s/eps lk_rmemorizing channels:
selecting a brnadcast source, memnrizing/he
channels (automatic) and adding or deleting channels (channel manager).
Selecting the Videe Signal-source
Before ynur/clevision can begin memorizing/he
available channels, you must specily the type nf signal snurce/hat is connedcd tn/he
TV (i.e. an antenna or a cable sys/em).
1.
Press the MENU button to display the menu.
Press the ,_ or v buttons to select "Channel", then press the ENTER button.
2.
Press the ENTER button select "Antenna".
Press the _ or v buttons to select "Air" or "Cable", then press the ENTER button.
Press the EXIT button to exit.
Storing Channels
in Menmrv
(Automatic
Methed)
1.
Press the MENU button to display the menu.
Press the ,,, or v buttons to select "Channel", then press the ENTER button.
2.
Press the _ or _ buttons to select "Auto Program", then press the ENTER button.
3,
Press the ,,. or _ buttons to select the antenna connection, then press the
ENTER button.
Air: "Air' antenna signal. / Cable: "Cable" antenna signal. /
Air+Cable: "Air" and "Cable" antenna signals.
4.
After all the available channels are stored, the "Auto Program" menu reappears.
Press the EXIT button to exit.
, ,,
Alternately, you can press the AUTO PROG. button on the remote control to bring up
the Auto Program menu.
English 16
Publicidad
Tabla de contenido
