Picture Control
Using Automatic
Picture Settings
Your TV has lout automatic picture settings ("Dynamic", "Standard", "Movie", and "Custom") that are preset at the facto U.
You can activa/e el/her Dynamic, Standard, Movie, or Custom by making a selectkm from flaemenu.
Or, you can select "Custom" which automatically rccalts your personalized picture settings.
1.
Press the MENU button to display the menu.
Press the ,_ or v buttons to select "Picture", then press the ENTER button.
2,
Press the ENTER
button
to select
"Mode".
Press the ENTER
button
again.
Press the
_. or v buttons
to select
the "Dynamic",
"Standard",
"Movie",
or "Custom"
picture
setting.
Press the ENTER
button.
._Choose Dynamic to increase the clarity and sharpness of the picture.
'_ Choose Standard
for the standard factory settings.
'_ Choose IVievie when watching movies,
,, Choose Custom
if you want to adjust the settings according to personai preference.
:_ When in PC mode, Tint, Sharpness and Color are not available.
3,
Press the ,_ or _ buttons to select "Contrast", "Brightness", "Sharpness",
"Color", or "Tint", then press the ENTER button.
4.
Press the ,q or _, buttons to decrease or increase the value of a particular item.
For example, if you select "Contrast", pressing the _ button increases it.
Press the ENTER button.
Press the EXIT button to exit.
- "Tint"doesn't operatein HDMI, PC or any Component mode.
- The Tint cannot be adjustedwhile watchingDigital TV.
- When you make changesto Contrast, Brightness,Sharpness,Color,Tint, ©SD color will
also be adjusted accordingly.
English 23