Turning The Tv On And Off; Plug & Play Feature - Samsung LN-S2738D Manual Del Usuario

Operation
Turning the TV On and Off
_[ POWER SOURCE _1 Press the POWER (9 button on the remote control.
m
0
I] I You can also use the 0 button on the front of the panet.
q_ ,--.,
Plug & Play Feature
When the TV is initiatty powered on, two basic customer settings proceed automaticalty and subsequently:
1. Press the POWERO button on the remote control.
The message "Menu language, Channels and Time will be set." is displayed.
Press the ENTER button, then "Select the language of the OSD" menu is
automatically displayed.
2, Press the ENTER button to enter the language.
Press the A or v buttons to select language, then the ENTER button.
"Select the antennas to memorize." menu is automatically displayed.
3, Press the _ or v buttons to memorize the channels of the selected connection.
Press the ENTER button to select "Start".
>- If the antenna is connected to ANT 1 (AIR), select "Air" and if it is connected to
ANT 2 (CABLE), select "Cable".
>- If both ANT 1 (AIR) and ANT 2 (CABLE) are connected, select the "Air + Cable".
In Cable mode, you can select the correct signal source among STD, HRC, and IRC
by pressing the * or _ button, then press the ENTER button.
Contact your local cable company to identify the type of cable system that exists in your
particular area.
4. The TV will begin memorizing all of the available channels.
After all the available channels are stored, the Auto program menu reappears.
Press the ENTER button when channel memorization is complete.
"Select the clock mode." menu is automatically displayed.
> To stop the search before it has finished, press the ENTER button with stop selected.
8. Press the ENTER button.
Press the A or - buttons to select "Manual" or "Auto", then the ENTER button.
Switches the Daylight Saving Time function on or off.
English 13