Connection To The External Thermostat; Ventilation; Use; Attention - Cadel CLOE Manual De Instalación

• If the feeder cable is damaged, it must be replaced by an authorized technician.
• When the stove is not going to be used for a long period of time, it advisable to remove the plug from
the socket on the wall.
9.9

CONNECTION TO THE EXTERNAL THERMOSTAT

EN
The stove works through a thermostat probe placed in its inner. If you desire, the stove can be connected
to an external room thermostat. This operation must be executed by an authorized technician.
For connection see WIRING SCHEME page 94:
• external thermostat: set up a temperature which is round 7°C.
• External chronothermostat: set up a temperature which is round 7°C and desable the chrono functions
from the menu 03-01.
9.10

VENTILATION

• The stove is endowed with a ventilation system.
• The air blown from fans keeps the appliance at a low temperature range in order to avoid high stresses
to the materials which make it up.
10

USE

10.1

ATTENTION

74
Do not cover the hot air outlet slits with any object to avoid stove's overheating!
The stove is not suitable for food cooking.
This appliance must not be used by people (childreen included) with reduced mobility,
psycological deseases or without experience and knowledge except in case of
supervision or instruction about the use of the appliance by people responsible for their
safety.
Fig. 34 - Do not cover air slits
CLOE - SQUARE