Product Description; Combination Possibilities - Ottobock Liner Instrucciones De Uso

1 Product description

INFORMATION
Last update: 2016-11-21
► Please read this document carefully before using the product.
► Follow the safety instructions to avoid injuries and damage to the
product.
► Instruct the user in the proper and safe use of the product.
► Please keep this document in a safe place.
INFORMATION
► The patient must be fitted with the liner no later than the date printed
on the inside of the packaging or on the label (MHD/BBD).
1.1 Function
In combination with an appropriate suspension solution, liners increase
wearer comfort and improve the suspension of the prosthesis. Together,
they reduce the forces that affect the residual limb.
These instructions for use apply to the following liners:
Material
Polyurethane
Material
Polyurethane
Polyurethane (Uneo liners)
Uneo liners are made of a polyurethane gel. The material is viscoelastic. It
adapts very well to the form and structure of the residual limb and protects
very well against impact forces.
Ottobock recommends a total surface weight-bearing socket (the "Harmony"
principle) with a harmony system or an exhaust valve.

1.2 Combination possibilities

This prosthetic component is part of the Ottobock modular system and can
be combined with other products of this modular system.
8
TF fitting
Reference number
6Y430, 6Y540
TT fitting
Reference number
6Y400, 6Y416, 6Y510, 6Y512, 6Y520,
6Y521, 6Y522, 6Y523
English