Description Of The Device - Stylies LEONIS - HUMIDIFIER Instrucciones De Uso

DESCRIPTION OF THE DEVICE

The device consists of the following main components (please see inside cover):
1. Mist outlet
2. Display / controls
3. Water tank lid
4. Water level indicator
5. Base
6. Air humidity, e.g. «34 %RH»
7. Status displays
8. On/Off switch
15. Water tank handle
16. Water tank
17. Base
18. Power cable with Hygrostat sensor
19. Descaler cartridge with tank lid
20. Tank lid
21. Descaler cartridge
22. Ventilator / ionisator
STARTING UP / QUICK GUIDE
This quick guide helps practised users to start the device in a few steps. For detailed start-up
instructions, please consult the next chapter.
1. Place the humidifier on a stable and watertight surface, never
on a carpet or parquet floor.
2. Remove the water tank lid (3). Hold the water tank firmly by
the handle (15) and pull it upwards.
3. Turn the tank upside down. Unscrew and remove the tank lid
(20).
4. Fill the tank with no more than 5 litres (1.3 US gallons) of cold
fresh water.
Heruntergeladen von manualslib.de Handbücher-Suchmachiene
9. Performance setting (1, 2 or 3)
10. Air humidity setting 35-75 %,
«Co» for Continuous operation
11. «Timer» adjustment for automatic
shutdown (0–12 hours)
12. Preheating adjustment
13. Ionisation setting
14. Night mode setting
23. Preheating
24. Ultrasonic membrane. Do not touch:
danger of burning!
25. «Clean Cube»
26. Water level sensor
27. Water tank lighting
28. Water collector
1./2.
3.
13