Description Of The Device - Stylies HERA Instrucciones De Uso

English
Congratulations! You have just become the owner of the extraordinary Stylies Ultrasonic hu-
midifier Hera with State-of-the-Art technology. It will bring you a lot of pleasure when using it
and it will improve the air quality of your rooms.
As for all electrical household devices, special caution is required when using this humidifier in
order to avoid injuries, fire and damages to the device itself. Before you use it for the first time,
please read through this instruction manual carefully and pay attention to the safety guidelines
and indications printed on the device.

DESCRIPTION OF THE DEVICE

The device consists of the following main components:
1. Power cable for power supply
2. Mist cap
3. Transparent water tank
4. Filter cartridge (optional)
5. Water tank cover
6. Main base
7. Control panel and Display
8. Ionic Silver Cube
9. Mist Cap guide
10. Handel
11. "On/Off" Switch button
12. "Humidity" button
13. "Output" button
14. "Warm Mist" button
15. "Night Mode" button
16. "Auto Mode" button
FIRST USE / OPERATION
Please note: never transport the device with a full water tank.
Possible hazards:
- too much water from water tank comes into the Main Base (6), this over loaded water level will
cause dramatic reduction of mist output of the device.
- water can easily come out from the Main Base (6).
- the water tank can fall off from the Main Base (6) and get damaged due to the heavy weight from
the water (and water can leak on to the floor).
1. For this reason, Main Base (6) of the Stylies Hera humidifier should be placed first with
empty Water Tank (3) in a suitable location.
2. When the device is in the desired location: Fill Water Tank (3) with fresh water and screw
the Tank Cover (5) back on firmly and check that it is sealed properly.. Place Water Tank
on base. Plug Power Cable (1) into the power socket.
In the model with Filter Cartridge (4): do not take off the Filter Cartridge from the Tank
Cover when opening and filling water for the tank.
3. Switch on the device by pressing the On/Off switch (11) on the Control Panel (7), the
8
( optional)
TM