Description Of The Device - Stylies MIRA Instrucciones De Uso

Ocultar thumbs Ver también para MIRA:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 36
English
Congratulations! You have just become the proud owner of the extraordinary Stylies Mira evap-
oration humidiier. You are sure to get a lot of pleasure from this device and it will improve the
air quality of your rooms.
As is the case for all electrical household devices, special caution is required when using this hu-
midiier in order to avoid injuries, ire damage and damages to the device. Please read through
this instruction manual carefully before use it for the irst time, and obey to the safety instruc-
tions mentioned in this manual and on the device accordingly.

DESCRIPTION OF THE DEVICE

1.
Cable
2.
Top cover
3.
Control panel
4.
Hygrostat sensor
5.
Handle
6.
Water Tank
7.
Cartridge
8.
Tank cap
9.
Filter cassettes
10. Base unit
11. Contact switch
12. Air inlet slots
13. Ionic Silver Cube
14. Cassette Clip
15. Water level switch
16. Water drain opening
17. Aroma box
FIRST USE /OPERATION
Choice of location
Before setting up the device, please note the following:
Never position the humidiier directly underneath a power socket.
Make sure that the humidiier is on a stable surface and people can not step over the con-
nected cable.
Do not place the humidiier on a water–sensitive loor surface.
Never cover the humidiier and do not place it in the immediate vicinity of furniture.
Use only in dry rooms and do not use an extension power cable.
Filling with water
Take the Water Tank (6) from its position by pulling the Handle (5) up.
Remove the Tank Cap (8), ill cold fresh water into the Tank, and put back the Tank Cap and
screw it tight on to the Tank.
Put the Tank back onto the unit .
8

Publicidad

Tabla de contenido
loading

Tabla de contenido