Characteristics - Sime MURELLE HM Para El Instalador

3

CHARACTERISTICS

3. 1 CONTROL PANEL (fig. 12)
5
1
2
2 - DESCRIPTION OF CONTROLS
ON/OFF KEYS
ON = Electricity supply to boiler is on
OFF = Electricity supply to boiler is on but nor ready for
functioning. However, the protection functions
are active.
SUMMER MODE KEY
When this key is pressed, the boiler functions only
when D.H.W. is requested (function not available)
WINTER MODE KEY
When this key is pressed, the boiler provides heating
and D.H.W.
D.H.W. TEMP KEY
When this key is pressed, the temperature of the
D.H.W. is shown on the display (function not available)
HEATING TEMP KEY
The first time the key is pressed, the temperature of
heating circuit 1 is shown.
The second time the key is pressed, the temperature
of heating circuit 2 is shown.
The third time the key is pressed, the temperature of
heating circuit 3 is shown (Three zones).
RE-SET KEY
This allows for restoring functioning after a functioning
anomaly.
INCREASE AND DECREASE KEY
By pressing this key the set value increases or decrea-
ses.
102
DESCRIPTION OF DISPLAY ICONS
3
4
3 - KEYS RESERVED FOR THE INSTALLER
(access to INST and OEM parameters)
4 - LUMINOUS BAR
Blue = Functioning
Red = Functioning anomaly
5 - PROGRAMMING CLOCK (optional)
Mechanical clock (code 8092228) or digital clock (code
8092229) to program heating and water supply.
SUMMER MODE ICON
WINTER MODE ICON
D.H.W. MODE ICON
HEATING MODE ICON
GRADED POWER SCALE
The segments of the bar light up in proportion to boiler power
output .
BURNER FUNCTIONING AND BLOCK ICON
DESCRIPTION OF DISPLAY ICONS
CHIMNEY SWEEP ICON
SECONDARY DIGITS
The boiler visualises the value of the pressure of the
system (correct value is between 1 and 1.5 bar)
MAIN DIGITS
The boiler visualises the values set, the state
of anomaly and the external temperature
INTEGRATIVE SOURCES ICON
PC CONNECTION
To be used only with the SIME programming kit and only
by authorised personnel. Do not connect other electro-
nic devices (cameras, telephones, mp3 players, etc.)
Use a tool to remove the cap and reinsert after use.
ATTENTION: Communication port
sensitive to electrostatic charges.
Before use, it is advisable to touch an earthed metallic
surface to discharge static electricity.
INFORMATION KEY
This key can be pressed several times to view the para-
meters.
CHIMNEY SWEEP KEY
This key can be pressed several times to view the para-
meters.
DECREASE KEY
This key changes the default settings.
INCREASE KEY
This key changes the default settings.
Fig. 12