Starting / Stopping The Engine - Stihl TS 440 Manual De Instrucciones

English
Change the fuel pickup body every year
Drain the fuel tank and allow it to air
N
out
Pull the fuel pickup body out of the
N
tank with a wire hook or other
suitable tool and disconnect it from
the hose
Connect a new fuel pickup body to
N
the hose
Return the fuel pickup body to the
N
tank
38
Starting / Stopping the
Engine
Checking the wheel brake system
Before starting work
1
Put on gloves and other appropriate
N
protective apparel as recommended
in this manual
Pull the brake lever (1) toward the
N
front handle and hold it the cutting
wheel can be turned by hand
Release the brake lever the wheel
N
brake is engaged the cutting
wheel cannot be turned by hand
If the cutting wheel can be turned by
N
hand without pulling the brake lever
toward the front handle: Do not work
with the TS 440 and have the wheel
brake system repaired by an
authorized STIHL servicing dealer
before using the machine.
The brake lever must be free from dirt
and debris and move easily when pulled
forward toward the front handle and
when released.
Starting the engine
3
3
2
Press the throttle trigger lockout (1)
N
and throttle trigger (2)
simultaneously and hold both down
Move the slide control (3) to START
N
and hold it in position
Release the throttle trigger, slide
N
control and throttle trigger lockout in
succession
This is the starting throttle position
N
1
TS 440