Storing The Machine - Stihl TS 440 Manual De Instrucciones

3
WARNING
To reduce the risk of fire and burn injury,
use only spark plugs authorized by
STIHL. Always press the spark plug
boot (1) firmly and securely onto the
spark plug terminal (2).
Do not use a spark plug with a
detachable SAE adapter terminal (3).
Arcing may occur that could ignite
combustible fumes and cause a fire.
This can result in serious injuries or
damage to property.
Only use resistor type spark plugs
N
with solid, non-threaded terminals
TS 440
Installing the spark plug
Check the electrode gap of the
N
1
spark plug and adjust it as
necessary. See specifications
Install the spark plug by hand and
N
screw it in
Tighten the spark plug with an
N
appropriately sized combination
wrench
Press the spark plug boot firmly
2 N
onto the spark plug
Position the cap for the spark plug
N
boot and screw it down securely

Storing the Machine

If the machine is to remain out of use for
3 months or more:
Drain and clean the fuel tank in a
N
well ventilated place
Dispose of fuel in accordance with
N
all applicable laws and regulations
Run the engine until the carburetor
N
is dry to help prevent the carburetor
diaphragms from sticking together
Remove the abrasive cutting wheel
N
Thoroughly clean the machine
N
Store the machine in a secure and
N
dry place. Protect it against
unauthorized use (e. g., by children)
English
45