Starting / Stopping The Engine - Stihl TS 700 Manual De Instrucciones

Closing the fuel filler cap
1.
2.
Insert the cap and turn it until it
N
engages in the mount
Press the cap down with your hand
N
and turn it clockwise
(approx. 1/8 turn) until it engages
completely and seals the tank.
Check the cap for tightness
Checking the installation of the fuel filler
cap
Grip the cap – the cap is closed
N
properly if it cannot be removed and
the markings (arrows) on the cap
and fuel tank are aligned
If the cap can be removed or the
markings do not align, close the cap
again – see the section "Closing the fuel
filler cap" in this instruction manual.
TS 700, TS 800
Change the fuel pickup body every year
Drain the fuel tank and allow it to air
N
out
Pull the fuel pickup body out of the
N
tank with a wire hook or other
suitable tool and disconnect it from
the hose
Connect a new fuel pickup body to
N
the hose
Return the fuel pickup body to the
N
tank
Starting / Stopping the
Engine
Note the safety instructions. Refer
N
to the chapter headed "Safety
precautions and working
techniques".
Press throttle trigger lockout (1) and
N
throttle trigger (2) simultaneously
Hold both triggers down
N
Move the master control lever (3) to
N
START and hold it in position too
Release the throttle trigger, master
N
control lever and throttle trigger
lockout in succession = starting
throttle position
English
41