Filling With Water; Adjusting The Outlet For Coffee Beverages; Using Milk - melitta Avanza 600 Serie Manual De Instrucciones

Basic operation

4.3 Filling with water

Only use fresh, cold water without carbon
dioxide for optimum coffee enjoyment.
Change the water daily.
Information
The quality of the water largely deter-
mines the flavour of the coffee. Therefore,
use a water filter (see section 6.3 Setting
the water hardness on page 45 and sec-
tion 7.6 Using a water filter on page 52).
The display lights up and
Water
requests you to refill water.
2
1
Fig. 8: Removing the water tank
1. Open the lid (2) of the water tank (1)
and pull the water tank upwards out of
the appliance by the handle.
2. Fill the water tank with water.
3. Insert the water tank into the appliance
from above and close the lid.
4.4 Adjusting the outlet for
coffee beverages
The outlet (7) is height-adjustable. Set the
greatest possible distance between the
outlet and the vessel. Depending on the
vessel, push the outlet up or down.
40
Fig. 9: Adjusting the outlet for coffee
beverages

4.5 Using milk

Use cooled milk for optimum coffee
enjoyment.
Fig. 10: Commercial milk pack
1. Remove the milk hose (25) from the
holder.
2. Insert the milk hose into a conventional
milk pack (27) or into a vessel filled
with milk.
7
25
27