Z I PP I E VO YA GE
R. HIP GUIDES (MODERATE)
Width Adjustment
a. Determine the proper location for each hip pad.
b. Remove the seat cushion to expose hip pad adjustment screws(A).
c. Loosen, or remove if necessary, two nuts under seat pan (B).
d. Adjust hip pads to the desired position.
e. Tighten the adjustment nuts (B) and replace the seat cushion.
Forward /rear
Pad
Adjustment
a. Determine the proper location for each hip pad.
b. Remove the cover from the hip guide to expose hip pad adjustment screws.
c. Loosen two adjustment screws (C).
d. Adjust hip pads to the desired position.
e. Tighten the adjustment screws (C) and replace the hip guide cover.
S. MEDIAL SUPPORT PAD (ADVANCED)
Medial support pads are optional equipment available only with the optional contoured
seating system.
Angle and Width Adjustment
a. Locate medial adjustment screw. (D) Screw is located beneath the forward edge
of the seat. Note: The receiver assembly plate will need to be partially loosened and
moved.
b. Lock the wheels, seat the child, and buckle the pelvic positioning belt.
c. Loosen the adjustment screw from beneath the seat and adjust medial pad to
proper width and angle.
d. Tighten adjustment screw to lock the medial position.
T. MEDIAL SUPPORT PAD (MODERATE)
Medial pad installation
a. Raise the footrest up so that it is horizontal with the seat pan.
b. Find the two holes (E) in the seat pan, located on both sides of the footrest tube.
c. Seat cushion must be attached.
d. Slide the metal bracket through the slot in the cushion and align holes in the
bracket with the holes in the seat pan.
e. Attach the Medial pad (F) to the seat pan with hardware (G).
56
57
58
59 60
IX. DEALER SERVICE & ADJUSTMENT
25
F
G
56
57
58
59
60
MK-100377 Rev. A