Creating Layout Points; Entering Values; Changing/Deleting Layout Points - Hilti PMD 200 Manual De Instrucciones Original

1. On the app's start screen, select New layout.
2. Define the control line (e.g. building axis or building wall) on the jobsite.
3. Position the target plate precisely on the first control point (0/0 starting point).
4. Use the left/right buttons to move the green laser line to the exact center of the control point.
5. To measure the first control point, select Measure.
6. Position the target plate precisely on the second control point (direction point).
7. Use the left/right buttons to move the green laser line to the exact center of the control point.
8. To measure the second control point, select Measure.
9. Check the control line and confirm it.
If the control line is not right, select Back and remeasure the control points.
6.4

Creating layout points

The layout points have to be entered manually in the app in accordance with the plan of the building.
1. To move the layout point in the direction of the blue arrow, enter the value in the blue input box.
2. To move the layout point in the direction of the yellow arrow, enter the value in the yellow input box.
6.4.1

Entering values

1. Select New point in the app.
2. Select the appropriate input box (yellow/blue).
▶ A keypad appears in the app.
3. Enter the appropriate value in accordance with the building plan.
4. To add or subtract a value, select the appropriate button (+/-).
5. When you finish defining the values, select OK.
6. When you have defined the position of the layout point, select Confirm.
6.4.2 Changing direction of the layout points
▶ To change the direction of the layout points relative to the 0/0 point, use the direction arrows (up/down
or left/right) below the input boxes.
6.4.3

Changing/deleting layout points

1. Select a layout point you want to change or delete.
2. Select the menu symbol at the top right.
3. To change a layout point, select Change.
4. Change the value in the appropriate input box.
5. To save the change, select Confirm.
To exit the menu without saving the change, select Cancel.
6. To delete the selected layout point, select Delete.
24 English 2275630
*2275630*