Symbols In The Documentation; Symbols In The Illustrations; Product-Dependent Symbols; Symbols On The Product - Hilti PMD 200 Manual De Instrucciones Original

CAUTION
CAUTION !
▶ Draws attention to a potentially dangerous situation that could lead to personal injury or damage to the
equipment or other property.
1.2.2

Symbols in the documentation

The following symbols are used in this document:
Read the operating instructions before use.
Instructions for use and other useful information
Dealing with recyclable materials
Do not dispose of electric equipment and batteries as household waste
1.2.3

Symbols in the illustrations

The following symbols are used in illustrations:
These numbers refer to the corresponding illustrations found at the beginning of these operating
instructions
The numbering reflects the sequence of operations shown in the illustrations and may deviate
from the steps described in the text
Item reference numbers are used in the overview illustrations and refer to the numbers used in
the product overview section
This symbol is intended to draw special attention to certain points when handling the product.
1.3

Product-dependent symbols

1.3.1

Symbols on the product

The following symbols can be used on the product:
The device supports near-field communication (NFC) technology, which is compatible with An-
droid platforms.
Hilti Li-ion battery type series used. Observe the information given in the section headed In-
tended use.
Li-ion battery
Battery state of charge indicator
On/off button
Never use the battery as a striking tool.
Do not drop the battery. Never use a battery that has suffered an impact or is damaged in any
other way.
1.4

Sticker on the product

Laser information
*2275630*
Laser class 2, based on the IEC/EN 60825-1:2014 standard and correspond-
ing to CFR 21 Sec. 1040.
Do not look straight into the laser beam.
2275630 English 17